Peration; General Conditions - ABB REACT-3.6-TL Product Manual

G
eneral conditions
The interpretation or variation of some data is reserved exclusively for specialized and
qualified staff.
The incoming voltage must not exceed the maximum values shown in the technical data,
section 2 in order to avoid damaging the equipment.
Consult the technical data for further details.
Before checking the operation of the equipment, it is necessary to have a
thorough knowledge of the Instruments chapter 6 and the functions that
have been enabled in the installation process.
The equipment operates automatically without the aid of an operator;
the operating state should be controlled through the equipment's
instrumentation.
During operation, check that the environmental and logistical conditions
are correct (see installation chapter 5).
Make sure that enviromental and logistical conditions have not changed
over time and that the equipment is not exposed to adverse weather
conditions.
- 107 -
Скачано с сайта интернет магазина https://axiomplus.com.ua/
Operation
7