Table of Contents
Advertisement
Inverter
tics
> Statistics
onsumpti.
> Lifetime
ufficien.
> Partial
from grid
> Today
to grid
> Last 7 days
to load
> Last 30 days
to load
> Last 365 days
r.
> User Period
gs
> Settings
d 0000
Password 0000
me
> Vstart
sh
> Input mode
S485 com
> Input UV Delay
y Select
> Service
ssword
> Remote ON/OFF
> MPPT Scan
*
ate Info
> Power Limit.
Policy
> Reactive Power
es
> Autotest
> Alarms
> Backup
> Info
> Part No.
> Serial No.
> Firmware
9. Autotest
This section of the menu is available only for the Italian country standard.
Refer to the section on this topic in the manual.
Display
10. Alarm
This section of the menu allows you to set the activation status of a relay
> Settings
(available either as a normally open contact – N.O. - and as a normally
closed contact -N.C.) and to configure customised alarm conditions.
Password 0000
> Backlight
This contact can be used, for example, to: activate a siren or a visual alarm,
> Contrast
control the disconnect device of an external transformer, or control an exter-
nal device.
> Buzzer
> Power Graph
Relay switching can be set in 9 different modes using the submenu Set
> Language
Alarm Type (For the "Alarm Conf.", "Al. Conf. Latch", "Al. Conf. Ext.",
"GoGo Rel(Auto)" and "GoGo Rel(Slave)" it is possible to configure cu-
stomised alarm conditions through the sub-menu Alarm Config and
GoGo Config):
• Production (display text "Production")
The relay is activated (status: switched) whenever the inverter connects
to the grid; as soon as the inverter is disconnected from the grid (for
whatever reason that caused disconnection), the relay is in its resting
position.
**
- 133 -
Скачано с сайта интернет магазина https://axiomplus.com.ua/
****
Meter
> Settings
Password 0000
> Meter model
> Meter Address
> Meter com
> Info
> Type
> Part No.
> Serial No.
> FW Rel.
> Measures
> Voltage
> Active Power
> Line current
> Load current
> Frequency
INVERTER RUN
- PRODUCTION -
N.C.
Relay State: Switched
N.O.
GRID DISCONNECTION
- NO PRODUCTION -
N.C.
Relay State: Idle
N.O.
GRID RECONNECTION
t=based on Country Standard
N.C.
Relay State: Idle
N.O.
DISCONNECTION
Yes
No
CAUSE IS STILL
PRESENT
7 - Operation
****
Battery
> General
> Settings
Password 000
> Battery Mo
> Battery Pa
> Info
> Nom. Cap
> Measures
> Ibat
> Vbat
> Pbat
> RE
> SOC
> SOH
> RT
> Pack 1
> Statistics
> Energy disc
> E-day
> E-7d
> E-30d
> E-365
> E-tot
> Settings
Password 000
> Pack 1 ena
> Smoke Sens
> Info
> Device Nam
> Serial No.
> FW Rel.
> Nom. Capac
Advertisement
Table of Contents
