Table of Contents
Advertisement
• Assisted setup - STEP 2
Setting Wi-Fi network
This setup stage relates to connecting the REACT system to a Wi-Fi
network.
The parameters relating to the home Wi-Fi network (set on the router)
that must be known and set during setup are:
- IP address acquisition type: DHCP or Static.
If you select the DHCP function (default setup) the router will automati-
cally assign an IP address to the REACT whenever it tries to connect to
the user network.
With Static, the user can assign a fixed IP address to the system.
the data which has to be entered in order for IP static address assigning
to take place will appear. Complete the additional fields at the bottom of
the screen (all the fields are mandatory with the exception of the secon-
dary DNS server).
- SSID: name of Wi-Fi network.
Identify and select your own (home) Wi-Fi network from all those shown
in the SSID field (you can carry out a new search of the networks that can
be detected with the "Aggiorna" (Update) button).
Once the network has been selected, confirm.
- Password: Wi-Fi network password.
Enter the password for the destination network (if necessary) and start
the connection attempt (it will take a few seconds).
If it is not possible to connect the REACT to the Wi-Fi network, or you do not want to do so,
select the "Procedi in modalità AP" (Continue in AP mode) button. In this situation, communi-
cation between the REACT and the tablet/smartphone/PC will continue to be point to point.
Once the REACT is associated with the domestic Wi-Fi network, the user
must reconnect the tablet/smartphone/PC to the same Wi-Fi network as
the REACT system. The key remains locked until this connection is esta-
blished.
The message provides the links required for the second stage of the
installation procedure (corresponding to the IP address assigned by the
home Wi-Fi network router to the REACT system).
Both links can be used each time you want to access the web server
inside the board, with the board connected to the home network.
The IP address assigned may vary for reasons connected to the Wi-Fi home router setup (for
example, a very brief DHCP lease time). If verification of the address is required, it is usually
possible to obtain the client list (and the corresponding IP addresses) from the Wi-Fi router
administration panel.
Скачано с сайта интернет магазина https://axiomplus.com.ua/
- 111 -
7 - Operation
Advertisement
Table of Contents
