Table of Contents
Advertisement
7 - Operation
• Assisted setup - STEP 5
Setting type of METER and REACT-BATT number.
- Type of REACT-MTR:
1. No meter (where system is installed without meter)
2. REACT-MTR-1PH (single-phase)
3. REACT-MTR-3PH (three-phase)
If the METER is three-phase the phase to which the REACT system is
connected must be selected.
- Type of battery unit (REACT-BATT) installed:
1. No battery (when the REACT system is used without a battery). Select
the number of battery units installed.
2. REACT-BATT-AP1
Once the type of meter (REACT-MTR) and number of battery units (RE-
ACT-BATT) are selected, the system will check the settings entered, gi-
ving confirmation or an error message if the setup was incorrect:
The guided system setup can be continued only if no errors are detected
in the settings made.
- 114 -
Скачано с сайта интернет магазина https://axiomplus.com.ua/
Advertisement
Table of Contents
