ABB REACT-3.6-TL Product Manual page 141

****
Meter
gs > Settings
d 0000 Password 0000
ight > Meter model
ast > Meter Address
r > Meter com
Graph > Info
age > Type
> Part No.
> Serial No.
> FW Rel.
> Measures
> Voltage
> Active Power
> Line current
> Load current
> Frequency
Meter > Measure
Select the Measure menu to access the following sub-menus:
****
Battery
1. Voltage
Grid voltage value. Depending on the type of meter connected it is pos-
sible to have a single value L1 (for the single-phase) or three values L1,
L2 and L3 (for the three-phase).
> General
> Settings
2. Active power
Value of active power delivered by system. Depending on the type of
Password 0000
meter connected it is possible to have a single value L1 (for the single-
> Battery Model
phase) or three values L1, L2 and L3 (for the three-phase).
> Battery Packs
3. Line current
> Info
Value of current fed into or taken from the grid. Depending on the type of
> Nom. Cap
meter connected, it is possible to have a single value IL1 (for the single-
phase) or three values IL1, IL2 and IL3 (for the three-phase).
> Measures
> Ibat
4. Load current
Value of current used to power domestic loads. Depending on the type of
> Vbat
meter connected it is possible to have a single value IL1-L (for the single-
> Pbat
phase) or three values IL1-L, IL2-L and IL3-L (for the three-phase).
> RE
5. Frequency
> SOC
Grid frequency value.
> SOH
> RT
> Pack 1
> Statistics
> Energy dischar.
> E-day
> E-7d
> E-30d
> E-365
> E-tot
> Settings
Password 0000
> Pack 1 enable
> Smoke Sensor
> Info
> Device Name
> Serial No.
> FW Rel.
- 141 -
> Nom. Capacity
Скачано с сайта интернет магазина https://axiomplus.com.ua/
****
Load Manager
> info
> Relay Status
7 - Operation
WIFI Logger
> Settings
> Restore AP
> Info
> Part No.
> Serial No.
> View IP
> View Mode