ABB REACT-3.6-TL Product Manual page 41

From 3.6 to 4.6 kw, solar inverters
Hide thumbs Also See for REACT-3.6-TL:
Table of Contents

Advertisement

Load management system
The REACT system is provided with four relays (incorporated into the
Load Manager Box) to manage external loads.
The types of utilities that can be connected to the four relays are
subdivided into three types:
• TYPE 0 can be activated ON-OFF (e.g. Lights, heaters)
These utilities require the configuration only of the time slot in which it is
wished to activate the relay.
• TYPE 1: Switchable (e.g. Lights, Heaters, Heat Pumps, Boilers)
These utilities require configuration of:
- Time slots
- Power Threshold ON
- Minimum time between two ONs
The relays are not power components (230Vac, 1A Max) and must be used, for example, to
control a power relay installed outside the REACT system.
For further details relating to the external load management system and the configurations
required for its operation, refer to the document "REACT -3.6/4.6-TL EXTERNAL LOADS
MANAGEMENT – Load Manager Description" available on website www.abb.com/
solarinverters.
Optimisation of self-consumption
REACT is equipped with an storage system (2kWh base system,
expandable up to 6kWh), which enables use of the photovoltaic energy
at different times.
The energy stored in the battery during the day can be used in evening
hours or whenever photovoltaic production is not sufficient to meet
consumption by domestic utilities.
Compared to a photovoltaic system without storage, self-consumption of
photovoltaic energy increases considerably.
Wi-Fi communication and monitoring
REACT is equipped with a Wi-Fi board which enables the configuration
and monitoring of the system to be performed wirelessly. This enables
the user to connect to the system directly and to activate it using a
smartphone, tablet or notebook. Once the system is in service the data
will be transmitted to the Aurora Vision web portal (an internet connection
using a Wi-Fi router is required) and can be consulted online or from the
app for smartphone/tablet.
AC back-up output - Means of operation
The REACT system is equipped with an AC Back-up output that can be
activated in different operating modes as listed below:
Скачано с сайта интернет магазина https://axiomplus.com.ua/
- 41 -
2 - Characteristics

Advertisement

Table of Contents
loading

This manual is also suitable for:

React-4.6-tl

Table of Contents