ABB REACT-3.6-TL Product Manual page 42

• Back-up Mode: Manual 1:
Conditions necessary to activate the back-up function are:
1. Agreement of manual user (by pressing "Enter" key on display for at
least 5sec);
2. External command/signal (Communication and control signal terminal
block
• Back-up Mode: Manual 2:
A necessary condition for activating the back-up function is:
- Agreement of manual user (by pressing "Enter" key on display for at
least 5sec).
• Back-up Mode: Manual 3:
Conditions necessary to activate the back-up function are:
- Agreement of manual user (by pressing "Enter" key on display for at
least 5sec);
- Lack of grid.
• Back-up Mode: Manual 4:
Conditions necessary to activate the back-up function are:
- Agreement of manual user (by pressing "Enter" key on display for at
least 5sec);
- External command/signal (Communication and control signal terminal
block
- Lack of grid.
• Back-up Mode: Auto 1:
A necessary condition for activating the back-up function is:
- External command/signal (Communication and control signal terminal
block
• Back-up Mode: Auto 2:
A necessary condition for activating the back-up function is:
- Lack of grid.
For further details relating to the Backup output and the corresponding operation modes,
please refer to the document "REACT -3.6/4.6-TL BACKUP OUTPUT - Operation and setup",
available on the website www.abb.com/solarinverters
Скачано с сайта интернет магазина https://axiomplus.com.ua/
21 , terminal 1-3).
21
, terminal 1-3).
21
, terminal 1-3).
- 42 -
2 - Characteristics