ABB REACT-3.6-TL Product Manual page 128

Inverter
cs > Statistics
nsumpti. > Lifetime
fficien. > Partial
om grid > Today
grid > Last 7 days
load > Last 30 days
to load > Last 365 days
. > User Period
> Settings
0000 Password 0000
e > Vstart
h > Input mode
85 com > Input UV Delay
Select > Service
sword > Remote ON/OFF
> MPPT Scan
*
te Info > Power Limit.
Policy > Reactive Power
> Autotest
> Alarms
> Backup
> Info
> Part No.
> Serial No.
> Firmware
5. Last 30 days
This section of the menu displays the statistics for the last 30 days:
• E-30d: Energy produced over the last 30 days
• Er-30d:
Display
• Val. : Value of production over the last 30 days, calculated using the
currency and conversion coefficient set in the relevant section of the Set-
tings menu
> Settings • CO
: Amount of CO
2
Password 0000
6. Last 365 days
> Backlight
This section of the menu displays the statistics for the last 365 days:
• E-365d: Energy produced over the last 365 days
> Contrast
• Er-365d:
> Buzzer
• Val. : Value of production over the last 365 days, calculated using the
currency and conversion coefficient set in the relevant section of the Set-
> Power Graph
tings menu
> Language
• CO
: Amount of CO
2
7. User Period
This section of the menu displays the statistics for a period chosen by
the user.
Once the start and end dates for the period have been set, the following
data are available:
• E-user: Energy produced during the selected period
• Val. : Value of production for the selected period, calculated with the
currency and conversion coefficient set in the relevant section of the
SETTINGS menu
• CO
: Amount of CO
2
Inverter > Settings
Selecting Settings brings up the first screen relating to the password.
**
The default password is "0000".
Enter the password using the keys on the display:
• DOWN scrolls down the numerical scale (from 9 to 0)
• UP scrolls up the numerical scale (from 0 to 9)
• ENTER confirms and moves to next digit
• ESC returns to the previous digit (from right to left)
• Press ESC several times to return to the previous menus
1. Vstart
This section of the menu is used to set the Vstart activation voltage to
adapt it to the needs of the system. This voltage imposes a minimum
input voltage on the inverter above which connection to the grid will be
attempted.
- 128 -
Скачано с сайта интернет магазина https://axiomplus.com.ua/
****
Meter
> Settings
saved over the last 30 days
2
Password 0000
> Meter model
> Meter Address
> Meter com
> Info
> Type
saved over the last 365 days
2
> Part No.
> Serial No.
> FW Rel.
> Measures
> Voltage
> Active Power
> Line current
> Load current
saved during the selected period
2
> Frequency
7 - Operation
****
Battery
> General
> Settings
Password 0000
> Battery Mode
> Battery Pack
> Info
> Nom. Cap
> Measures
> Ibat
> Vbat
> Pbat
> RE
> SOC
> SOH
> RT
> Pack 1
> Statistics
> Energy discha
> E-day
> E-7d
> E-30d
> E-365
> E-tot
> Settings
Password 0000
> Pack 1 enabl
> Smoke Sensor
> Info
> Device Name
> Serial No.
> FW Rel.
> Nom. Capacit