Table of Contents
Advertisement
G
eneral conditions
The interpretation or variation of some data is reserved exclusively for specialized and
qualified staff.
The input voltage must not exceed the maximum values shown in the technical data, section
2 in order to avoid damaging the equipment.
Consult the technical data for further details.
Operation
Before checking the operation of the equipment, it is necessary to have a
thorough knowledge of the Instruments chapter 6 and the functions that
have been enabled in the installation process.
The equipment operates automatically without the aid of an operator;
the operating state should be controlled through the equipment's
instrumentation.
During operation, check that the environmental and storage conditions
are correct (see installation chapter 5).
Make sure that environmental and storage conditions have not changed
over time and that the equipment is not exposed to adverse weather
conditions.
- 96 -
7
Advertisement
Table of Contents
