IFM Electronic Ecomat 300 AL1030 Device Manual page 27

Description Colour
RDY Green/
yellow/ red
RUN Green
ERR Red
US Green/red
UA green
Descrip- Status
tion
Ready Green ON
Yellow flashes
Green/ yellow
flashes
Red ON
Off
RUN Off
Flashes slowly
(25 Hz)
Single pulse
Green ON
Flashes
(10 Hz)
Error On
Flashes slowly
(25 Hz)
Single pulse
Double pulse
Off
U Green ON
sensors
Off
Red ON
U On
actuators
Off
IO-Link Master EtherCat
Description
Unit is ready for operation
Firmware update is being performed
Overvoltage or undervoltage at U
Temperature of the device is in the critical
area
Failure of the actuator supply U
and U LED red:
S
sensor supply overload
Rotary encoding switches are set to an
invalid/reserved position
Device is not ready for operation
Device is in the state Init
The device is in the pre-operational state
200 ms on, 1000 ms off, device is in the
safe-operational state
The device is in the operational state
Device is in the bootstrap state
Critical error in the device
Configuration error, a state transition
initiated by the master cannot be executed
Local application error
Watchdog timeout
The EtherCAT® watchdog for monitoring of
the process data has expired
no fault
Communications power/sensor voltage
present
Communications power/sensor voltage not
present or too low
Sensor voltage overloaded
Actuator voltage is sufficient
Actuator voltage not present or too low
S
A
UK
27