Identification; Configuration Via Rotary Encoding Switch - IFM Electronic Ecomat 300 AL1030 Device Manual

Fix the device to a level surface or to a profile Do not use this device to bridge gaps in order to
prevent forces being transmitted via the device
Use standard M5 screws with toothed lock washer and self-locking nuts Observe the maximum
torque of the screws

13 Identification

With EtherCat devices, there is a differentiation between address assignment and
identification
Addresses are used for direct communication between EtherCat master and the
corresponding slave In this context, each master assigns a unique 16 bit address
to each slave
Identifications are used to clearly identify a slave in an EtherCat network
Identifications for IO-Link masters are:
– Device Identification Value
– Configured Second Station Alias

14 Configuration via rotary encoding switch

You can configure the address assignment and other functions using rotary
encoding switches
x10 x1
0
14 E
2
D
4
12 C
B
6
10 A
8
S1
S1 (x10)
► After modifying the switch position, restart the device A modification to the switch position does
not take effect during operation
The code results from the sum of S1 x 10 plus S2 x 1 The figure shows the code
77 (7 x 10 + 7)
S1 S2
015 009
Others
Switch positions 01159
0
F
2
4
6
9
8
S2
S2 (x1)
Code
01159
Function
Device Identification Value
Reserved
IO-Link Master EtherCat
25
UK