124 Pin Connection Voltage Supply U /U; 125 Pin Connection Of The Inputs And Io-Link Ports; 1251 Port Class A (Type A); 1252 Port Class B (Type B) - IFM Electronic Ecomat 300 AL1030 Device Manual

IO-Link Master EtherCat
12.4 Pin connection voltage supply U
Pin assignment of the power supply, T-coded
12.5 Pin connection of the inputs and IO-Link ports
IO-Link A ports (X01X04)
3 4
1: 24 V DC (L+)
5
2: DI
2 1
3: GND (L-)
4: C/Q
IO-Link data transmission channel
5: not used
12.5.1 Port class A (type A)
The IO-Link port according to type A is assigned an additional hardwired DI (digital
input) at pin 2
12.5.2 Port class B (type B)
The IO-Link port according to type B has an additional supply voltage via pins 2
and 5 This port is designed to connect devices with a higher current requirement
12.6 Operating modes
The C/Q cable (pin 4) can be configured independently of the other pins The IO-
Link ports can be operated in the following operating modes:
– DI (behaves like a digital input supplied via U
– DO (behaves like a digital output supplied via U
– IO-Link (IOL sensor supplied via U
12.7 Wiring information
Ensure the FE connection using mounting screws, in order to ensure immunity to interference
To ensure IP65 / IP67 protection, cover unused sockets with protective caps
Only supply the IO-Link master and the IO-Link devices with the voltage U
terminal points
Observe the correct polarity of the supply voltages U
device
When connecting the sensors and actuators, observe the assignment of the connections
24
IN X31
1: + 24 V DC (US) brown
2: GND (UA) white
3: GND (US) blue
4: + 24 V DC (UA) black
/U
S A
IO-Link B ports (X05X08)
3 4
1: 24 V DC (L+)
5
2: 24 V DC (U
3: GND (L-)
2 1
4: C/Q
IO-Link data transmission
channel
5: GND (UA)
)
S
)
S
/ IOL actuator supplied via U
S
and U in order to prevent damage to the
S A
OUT X32
1: + 24 V DC (US) brown
2: GND (UA) white
3: GND (US) blue
4: + 24 V DC (UA) black
)
A
and U
S
and U provided at the
S A
)
A