84 Diagnostic And Status Indicators; 841 Diagnostics; 842 Status - IFM Electronic Ecomat 300 AL1030 Device Manual

IO-Link Master EtherCat
8.4 Diagnostic and status indicators
8.4.1 Diagnostics
The diagnostic indicators (green/yellow/red) indicate whether an error is present
or not In case of an error, they indicate the error type and location The device is
operating correctly if all green indicators are on
8.4.2 Status
The status indicators (yellow) indicate the signal state of the corresponding input/
output or of the IO-Link port If the yellow status indicators are on, this indicates
signal state "1" of the input/output signal
The devices have three main areas for diagnostics and status indicators
● Indicators for the network/bus system (network/bus-specific) - Data
● Indicators for the power supplies - Power
● Indicators for the inputs and outputs and the IO-Link ports (device-specific) -
Signal
12
Data
Power
Signal