141 Reserved/Invalid Switch Position; 142 Configured Second Station Alias; 143 Hot Connect; Local Static And Diagnostic Displays - IFM Electronic Ecomat 300 AL1030 Device Manual

IO-Link Master EtherCat
With this switch position, the EtherCAT® Explicit Device Identification is set
manually
After power-on, the device is ready for operation as soon as the LED RDY lights green A connection
to the device can, however, not be established in this switch position
As soon as the RDY LED lights green, a new switch position can be selected on the rotary encoding
switch and the device can be restarted
14.1 Reserved/invalid switch position
The device starts with the previous settings, eg with the settings that were valid
before the device was restarted
14.2 Configured Second Station Alias
For information about the use of the "Configured Second Station Alias"
identification, please refer to your project planning software
14.3 Hot Connect
The Hot Connect functionality makes it possible to remove or add re-configured
sections from the data traffic before the start or during operation This can be
done eg by disconnecting/connecting the communication line or by switching the
participant on/off This functionality is called "flexible topology" or "Hot Connect"

15 Local static and diagnostic displays

15.1 Displays for Ethernet ports and voltage supply
LA LA
ACT ACT
RDY ERR
RUN
US
UA
Description Colour
L/A green
26
Descrip- Status
tion
Link / Green ON
Activity
Green OFF
Description
Connection to EC IN / EC OUT established
Connection to EC IN / EC OUT
not established