233 Port Status - IFM Electronic Ecomat 300 AL1030 Device Manual

IO-Link Master EtherCat
Index Sub-in-
(hex) dex (hex)
2800 02
03
2810 IO-Link parameter port 2
00
 
2870 IO-Link parameter port 8
 
The respective IO-Link port must be in the IO-Link operating mode to make sure that these settings
apply to the objects
23.3 Port status
The object F100
hex
represented by a sub-index The IO-Link status (eg port inactive, Siomode Digital
in, etc) and an error code are stored, if available The object can be read cyclically
or optionally be mapped in the process data
Index (hex) Sub index
(hex)
F100 IO-Link Port Status
00
01
40
Object Data
name type
Device para- ARRAY
meters [0...15]
OF
BYTE
Analogue UINT16
converter
Parameter
Number of UINT8
entries
 
 
(IO-Link port status) contains status data for each port,
Object Data
name type
Number of UINT8
entries
IO-Link Port UINT8
1 Status
Rights Description/value
R/W Direct Parameter Page 2 (DPP2)
The device parameter page 2 describes the
area between the IO-Link objects 10
This relates to an optional manufacturer-
specific area of the IO-Link device data
Element Description
[0] DPP2 object 10
[15] DPP2 object 1F
R/W Special object for the IO-Link/analogue
converters
The settings in this object describe the ISDU
object 80 of the converter
hex
You find the detailed structure of the object in
the corresponding device data sheet
RO Number of sub-indexes of the object
 
 
Rights Description/value
RO Number of sub-indexes of the object
R/W Status byte of the first IO-Link port
Bit
1F
hex hex
hex
hex
Description