152 Displaying The Io-Link Ports And Inputs - IFM Electronic Ecomat 300 AL1030 Device Manual

IO-Link Master EtherCat
15.2 Displaying the IO-Link ports and inputs
30
X01
32
IOL1...8
X03
UA
X05
UA
X07
Description Colour
IO-Link LED Green /
yellow / red
30  33 Yellow
UA Green/red
28
DI 1...4
31
X02
33
X04
UA
UA
X06
UA
X08
Description Status
Status of Green ON
the IO-Link
ports
flashes
(X01 
X08)
Yellow ON
Red ON
Red ON
Red ON
Red ON
Status of Yellow ON
the digital
Yellow OFF
inputs
Actuator Green ON
supply for
Green OFF
X05  X08
Red ON
IO-Link communication is active
Green IO-Link communication is not available
In the SIO mode, the digital input or output
IO-Link communication error
Overload of the L+/L- cable
Overload of the L+/L- cable
Overload of the C/Q cable
Off In the SIO mode, the digital input or output
Actuator voltage is sufficient
Actuator voltage not present or too low
Short circuit between pin 2 and pin 5
Description
is set
In IO-Link mode
In IO-Link mode
In SIO mode
is not set
Input is set
Input is not set