Table of Contents
Advertisement
IO-Link Master EtherCat
5.2 IOL (IO-Link port)
These devices have IO-Link ports for communication-capable sensors so that the
automation device can make dynamic changes to the sensor parameters directly
The IO-Link ports can be operated in the following operating modes:
– DI (behaves like a digital input supplied via U
– DO (behaves like a digital output supplied via U
– IO-Link (IOL sensor supplied via U
5.3 Connections
The bus, I/O devices and supply are connected via M12 screw connections Each
device is connected directly to the network/bus system
5.4 Protection rating
The devices have IP65/67 protection rating To ensure IP65 / IP67 protection,
cover unused sockets with protective caps
8
)
S
)
S
/ IOL actuator supplied via U
S
and U
)
S
A
Advertisement
Table of Contents
