Electrical Installation: Output Options With Cable Gland - Ametek DR6500 Handbook

ELECTRICAL CONNECTIONS
4

4.3 Electrical installation: output options with cable gland

Figure 4-1: Terminals for electrical installation: standard cable gland
1 Grounding terminal in the housing (if the electrical cable is shielded)
2 Current output -
3 Current output +
4 Location of the external grounding terminal (at the bottom of the converter)
INFORMATION!
Electrical power to the output terminal energizes the device. The output terminal is also used for
HART ® communication.
CAUTION!
Use the applicable electrical cables with the cable glands.
•
Make sure that the current is not more than 5 A or that there is 5 A-rated fuse in the
•
electrical circuit that energizes the device.
40 www.drexelbrook.com
DR6500
DR6500-PM-English-Issue 1