Table of Contents
Advertisement
OPERATION
6
Menu
Function
No.
C5.1.2.3
Long Tag
C5.1.2.4
Manufacturer ID This is the manufacturer ID number given to
C5.1.2.5
Device Type
C5.1.2.6
Device ID
C5.1.2.7
Universal
Revision
C5.1.2.8
Device Revision
C5.1.2.9
Software
Revision
C5.1.2.1
Hardware
0
Revision
C5.1.3 Device Information
C5.1.3.1
Descriptor
C5.1.3.2
Message
C5.1.3.3
Date
C5.1.3.4
Cfg. Change
Counter
C5.1.4 HART Variables
C5.1.4.1
Current Out. 1
Var.
C5.1.4.2
HART/sec./CO2
Var.
84
Function description
Use this menu item to change the long Tag
name. It can have a maximum of 32
characters. For more data about the
characters available, refer to
functions
on page 62 (values in menu items).
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
setting:
setting: Operator
setting:
setting:
the supplier by the HART Foundation.
This is the device type number given to the
supplier by the HART Foundation.
This is the device ID number given to the
supplier by the HART Foundation. This
shows that the HART Foundation registered
the HART® device description (DD) file.
This is the version of the HART protocol
used by the device.
This is the revision number for the HART®
device description.
This is the revision number for the device
software.
This is the revision number for the device
hardware.
You can give a short description (16
characters maximum) of the device in this
menu item.
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
setting: Operator
setting:
setting:
setting:
You can give more data in this menu item
(32 characters maximum).
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
setting: Operator
setting:
setting:
setting:
You can enter the date in this menu item
(Format: Year-Month-Day / YYYY-MM-DD)
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
setting:
setting: Operator
setting:
setting:
This function counts the number of changes
to the HART® device settings
This is the first measurement type shown on
HART® controllers. Make a selection from
the list.
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
setting: Expert
setting:
setting:
setting:
This is the second measurement type shown
on HART® controllers. Make a selection
from the list.
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
Minimum access level to change the
setting: Expert
setting:
setting:
setting:
www.drexelbrook.com
Selection list
—
Keypad
Read only
Read only
Read only
Read only
Read only
Read only
Read only
—
—
—
Read only
Level, Distance, Sensor
Value, Reflection
Level, Distance, Sensor
Value, Reflection
DR6500
Default
—
—
—
—
—
—
—
—
—
—
2014-01-01
—
Level
2
Level
2
DR6500-PM-English-Issue 1
Advertisement
Table of Contents
