Ametek DR6500 Handbook page 92

OPERATION
6
Screen
92
Steps
•
[> > > > ] to change the position of the
cursor.
•
[ ] to decrease the value (or move
the decimal point one digit to the
left) or [ ] to increase the value (or
move the decimal point one digit to
the right).
•
[^ ^ ^ ^ ] to confirm.
•
[> > > > ] to change the position of the
cursor.
•
[ ] to decrease the value (or move
the decimal point one digit to the
left) or [ ] to increase the value (or
move the decimal point one digit to
the right).
•
[^ ^ ^ ^ ] to confirm.
•
[ ] or [ ] for the selection of the
current output range (3.8-20.5 mA
(NAMUR), 4-20 mA, 3.8-20.5 mA
(reversed) or 4-20 mA (reversed).
•
[^ ^ ^ ^ ] to confirm.
www.drexelbrook.com
Description
0% range. Use this step to give the 0%
output setting in the tank.
Refer to the illustrations that follow. When
menu item A4.1.3.1 Current Out. 1 Var. A4.1.3.1 Current Out. 1 Var. A4.1.3.1 Current Out. 1 Var. A4.1.3.1 Current Out. 1 Var. is
set to "Level", illustration 1 shows the
position of 0% output as a level above the
tank bottom. When menu item A4.1.3.1
Current Out. 1 Var. is set to "Distance", Current Out. 1 Var.
Current Out. 1 Var. Current Out. 1 Var.
illustration 2 shows the position of 0%
output as a distance below the flange facing
or thread stop of the process connection.
100% range. Use this step to give the 100%
output setting in the tank. Refer to the
illustrations that follow. Illustration 1
shows the settings for level. Illustration 2
shows the settings for distance.
Refer to the illustrations that follow. When
menu item A4.1.3.1 Current Out. 1 Var. A4.1.3.1 Current Out. 1 Var. is A4.1.3.1 Current Out. 1 Var. A4.1.3.1 Current Out. 1 Var.
set to "Level", illustration 1 shows the
position of 100% output as a level above the
tank bottom. When menu item A4.1.3.1
Current Out. 1 Var. Current Out. 1 Var. is set to "Distance", Current Out. 1 Var. Current Out. 1 Var.
illustration 2 shows the position of 100%
output as a distance below the flange facing
or thread stop of the process connection.
Current output range. This menu item gives
current output values to the measuring
range between 0% and 100% values given
in the "0% range" and "100% range" steps.
If you set this menu item to "4-20 mA" or
"3.8-20.5 mA":
•
0% Range = 4 mA
•
100% Range = 20 mA
If you set this menu item to "4-20 mA
(reversed)" or "3.8-20.5 mA (reversed)":
•
0% Range = 20 mA
•
100% Range = 4 mA
DR6500-PM-English-Issue 1
DR6500
A4.1.3.1 A4.1.3.1 A4.1.3.1
A4.1.3.1 A4.1.3.1 A4.1.3.1