How To Turn Or Remove The Display Module (Option) - Ametek DR6500 Handbook

DR6500

3.10 How to turn or remove the display module (option)

If there is an object adjacent to the device that makes it difficult to read the display, you can
rotate the display in increments of 90°.
Figure 3-15: How to turn or remove the display module (option)
Equipment needed:
• Cover wrench
• Display extractor
CAUTION!
Disconnect the power supply.
Follow this procedure:
• Remove the housing cover with the cover wrench.
• Find the two clips that hold the display module in the housing.
DR6500-PM-English-Issue 1 www.drexelbrook.com
INSTALLATION
3
35