Minimum Power Supply Voltage - Ametek DR6500 Handbook

DR6500

8.4 Minimum power supply voltage

Use these graphs to find the minimum power supply voltage for a given current output load.
Non-Ex and Hazardous Location approved (Ex i / IS) devices
Figure 8-6: Minimum power supply voltage for an output of 21.5 mA at the terminals (Non-Ex and Hazardous Location
approval (Ex i / IS))
X: Power supply U [V DC]
Y: Current output load R
Hazardous Location (Ex d / XP/NI) approved devices
Figure 8-7: Minimum power supply voltage for an output of 21.5 mA at the terminals (Hazardous Location approval
(Ex d / XP/NI))
X: Power supply U [V DC]
Y: Current output load R
DR6500-PM-English-Issue 1
[Ω]
L
[Ω]
L
www.drexelbrook.com
TECHNICAL DATA
8
127