Nameplates; Nameplate (Examples) - Ametek DR6500 Handbook

DR6500

2.4 Nameplates

INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.

2.4.1 Nameplate (examples)

Figure 2-5: Non-Ex nameplate attached to the housing
1 Cable entry size
2 Electronic revision (according to NAMUR NE 53)
3 Signal output (analog, HART®, fieldbus, etc.), input voltage and maximum current (fieldbus options: basic current)
4 Degree of ingress protection (according to EN 60529 / IEC 60529)
5 Customer tag number
6 Date of manufacture
7 Serial number
8 Type code (defined in order). For more data, refer to
9 Model name and number. C = compact version.
10 Company logo, name and postal address
Country of manufacture / Company web address
11 cQPSus electrical safety certification for the USA and Canada. Agrees with NEC and CEC requirements for installa-
tion in ordinary locations.
12 WARNING! Hot surface. If the device is connected to tank that operates at high temperature, there is a risk of injury.
DR6500-PM-English-Issue 1
DEVICE DESCRIPTION
Order code
on page 150.
www.drexelbrook.com
2
21