Table of Contents
Advertisement
DR6500
3.3 Transport
Figure 3-2: How to lift the device
WARNING!
Lift the device carefully to prevent damage to the antenna.
3.4 Pre-installation requirements
INFORMATION!
Obey the precautions that follow to make sure that the device is correctly installed.
• Make sure that there is sufficient space on all sides.
• Protect the signal converter from direct sunlight. If necessary, install the weather protection
accessory.
• Do not subject the signal converter to heavy vibrations. The devices are tested for vibration
and agree with EN 50178 and IEC 60068-2-6.
DR6500-PM-English-Issue 1
www.drexelbrook.com
INSTALLATION
3
23
Advertisement
Table of Contents
