Ametek DR6500 Handbook page 120

80 ghz radar (fmcw) level transmitter for powders and dusty atmosphere
Table of Contents

Advertisement

TECHNICAL DATA
8
Process connections
DN40 (1
DN40 (1
DN40 (1
DN40 (1½¨) Lens antenna
) Lens antenna
) Lens antenna
) Lens antenna
Thread
Flange, EN 1092-1
Flange, ASME B16.5
DN70 (2¾¨) Lens antenna
DN70 (2
) Lens antenna
DN70 (2
DN70 (2
) Lens antenna
) Lens antenna
Thread
Flange, EN 1092-1
Flange, ASME B16.5
Electrical connections
Power supply
Maximum current
Current output load
Cable entry
Cable gland
Cable entry capacity (terminal)
120
G 1½ A (ISO 228); 1½ NPT (ASME B1.20.1)
Low-pressure flanges: DN50...200 in PN01;
Standard flanges: DN50 in PN40; DN80...200 in PN10, PN16 and PN40 (Type B1);
others on request
Optional flange facing: Type A
Low-pressure flanges: 2¨...8¨ in 150 lb (max. 15 psig);
Standard flanges: 2¨...8¨ in 150 lb RF and 300 lb RF; others on request
Optional flange facing: FF (Flat Face)
G3 A (ISO 228); 3 NPT (ASME B1.20.1)
Low-pressure flanges: DN80...200 in PN01;
Standard flanges: DN80...200 in PN10, PN16 and PN40 (Type B1); others on request
Optional flange facing for standard flanges: Type A
Low-pressure flanges: 3¨...8¨ in 150 lb (max. 15 psig);
Standard flanges: 3¨...8¨ in 150 lb RF and 300 lb RF; others on request
Optional flange facing for standard flanges: FF (Flat Face)
Terminals output – Non-Ex / Ex i:
Terminals output
Non-Ex / Ex i:
Terminals output
Terminals output
Non-Ex / Ex i:
Non-Ex / Ex i:
12...30 V DC; min./max. value for an output of 21.5 mA at the terminals
Terminals output – Ex d:
Terminals output
Terminals output
Terminals output
Ex d:
Ex d:
Ex d:
16...36 V DC; min./max. value for an output of 21.5 mA at the terminals
21.5 mA
[Ω] ≤ ((U
Non-Ex / Ex i:
Non-Ex / Ex i:
Non-Ex / Ex i: R
Non-Ex / Ex i:
L
power supply voltage
on page 127.
[Ω] ≤ ((U
Ex d:
Ex d: R
-16 V)/21.5 mA). For more data, refer to
Ex d:
Ex d:
L
ext
voltage
on page 127.
Standard: M20×1.5; Options: ½ NPT; 4-pin male M12 connector
Standard: none
Options: M20×1.5 (cable diameter: 7...12 mm / 0.28...0.47¨); others are available on
request
0.5...3.31 mm² (AWG 20...12)
www.drexelbrook.com
-12 V)/21.5 mA). For more data, refer to
ext
DR6500
Minimum
Minimum power supply
DR6500-PM-English-Issue 1

Advertisement

Table of Contents
loading

Table of Contents