Ametek DR6500 Handbook page 85

DR6500
Menu Function
No.
C5.1.4.3 Tertiary Var.
C5.1.4.4 Quaternary Var.
C6 Display
C6.1 Language
C6.2 Backlight
C6.3 Contrast
C6.4 1st Meas. Page C6.4 1st Meas. Page C6.4 1st Meas. Page C6.4 1st Meas. Page
C6.4.1 Function
C6.4.2 1st Value
Variable
C6.4.3 0% Range
DR6500-PM-English-Issue 1
Function description
This is the third measurement type shown
on HART® controllers. Make a selection
from the list.
Minimum access level to change the Minimum access level to change the Minimum access level to change the Minimum access level to change the
setting: User setting:
setting: setting:
This is the fourth measurement type shown
on HART® controllers. Make a selection
from the list.
Minimum access level to change the Minimum access level to change the Minimum access level to change the Minimum access level to change the
setting: User setting:
setting: setting:
Data can be shown in one of the languages
stored in the device. Make a selection from
the list.
Minimum access level to change the Minimum access level to change the
Minimum access level to change the Minimum access level to change the
setting: User setting:
setting: setting:
If you set this menu item to "Enabled", a
light comes on when you push a button on
the display keypad and if the loop current is
more than 6 mA.
Minimum access level to change the Minimum access level to change the
Minimum access level to change the Minimum access level to change the
setting: User setting: setting: setting:
The contrast control for the display screen.
You can select a shade of grey between light
grey (-10) and black (+10).
Minimum access level to change the Minimum access level to change the
Minimum access level to change the Minimum access level to change the
setting: User setting: setting: setting:
This menu item changes the configuration
of data shown on the display screen in
Normal mode. There are two measurement
pages available to show readings in Normal
mode. This setting is for the first page.
Minimum access level to change the Minimum access level to change the
Minimum access level to change the Minimum access level to change the
setting: User setting:
setting: setting:
This changes the measurement type of the
first value on the measurement page.
Minimum access level to change the Minimum access level to change the Minimum access level to change the Minimum access level to change the
setting: User setting:
setting: setting:
This is the 0% value given to the bar graph
indicator in Normal mode. The range is
related to the measurement type set in
C6.4.2 1st Value Variable. This menu item is
only available if you set C6.4.1 Function to
"One Value & Bar" or "Two Values & Bar".
Minimum access level to change the Minimum access level to change the Minimum access level to change the Minimum access level to change the
setting: User setting: setting: setting:
www.drexelbrook.com
OPERATION
Selection list
Level, Distance, Sensor
Value, Reflection
2
Level, Distance, Sensor
Value, Reflection
2
English, German, French,
Italian, Portuguese,
Spanish, Czech, Polish,
Chinese (simplified),
Japanese, Russian,
Turkish
Disabled, Enabled
min-max:
-10...+10
One Value, One Value &
Bar, Two Values, Two
Values & Bar, Three
Values
Level, Distance, Sensor
Value, Reflection
2
Refer to "Function
description".
6
Default
Reflection
Sensor Value
English
Enabled
0
One Value &
Bar
Distance
Refer to
"Function
description".
85