DR6500
Figure 3-17: Installation of the weather protection
1 Put the weather protection clamp around the top of the device.
2 Attach the two locking nuts to the threads on the weather protection clamp. Tighten the lock-
ing nuts with a 10 mm socket wrench.
3 Lower the weather protection cover onto weather protection clamp until the hole for the lock
is in the slot at the front of the cover.
4 Put the R-clip into the hole at the front of the weather protection cover.
5 End of the procedure.
DR6500-PM-English-Issue 1
www.drexelbrook.com
INSTALLATION
3
37