Infinitely Variable Change Of Numeric Data Value; Read-Out And Programming Of Indexed Parameters - Danfoss FC 300 Programming Manual

FC 300 Programming Guide 2. How to Programme

2.1.14. Infinitely Variable Change of Numeric Data Value

If the chosen parameter represents a numeric data value, select a digit
by means of the [◀] [▶] navigation keys.
2
Change the selected digit infinitely variably by means of the [▲] [▼] nav-
igation keys.
The chosen digit is indicated by the cursor. Place the cursor on the digit
you want to save and press [OK].
2.1.15. Changing a Data Value,Step-by-Step
Motor Power Motor Voltage Motor
Certain parameters can be changed step by step or infinitely varying. This applies to (par. 1-20), (par. 1-22) and
Frequency
(par. 1-23).
The parameters are changed both as a group of numeric data values and as numeric data values infinitely varying.

2.1.16. Read-out and Programming of Indexed Parameters

Parameters are indexed when placed in a rolling stack.
Par. 15-30 to 15-32 contain a fault log which can be read out. Choose a parameter, press [OK], and use the [▲] [▼] navigation keys to scroll through the
value log.
Use par. 3-10 as another example:
Choose the parameter, press [OK], and use the [▲] [▼] navigation keys to scroll through the indexed values. To change the parameter value, select the
indexed value and press [OK]. Change the value by using the [▲] [▼] keys. Press [OK] to accept the new setting. Press [CANCEL] to abort. Press [Back]
to leave the parameter.
21
®
MG.33.M3.02 - VLT is a registered Danfoss trademark