Danfoss FC 300 Programming Manual page 124

2. How to Programme
34-50 Actual Position
34-51 Commanded Po-
sition
34-52 Actual Master
Position
2
34-53 Slave Index Po-
sition
34-54 Master Index Po-
sition
34-55 Curve Position
34-56 Track Error
34-57
Error
34-58 Actual Velocity
34-59 Actual Master
Velocity
34-60
Status
34-61 Axis Status
34-62 Program Status
10-13 Warning Parameter
Range:
*
0 [0 - FFFF]
10-14 Net Reference
Read only from LCP.
* Off
[0]
[1] On
10-15 Net Control
Read only from LCP.
124
Synchronizing
Synchronizing
Select the process read data for I/O Assembly Instances 101/151. Elements [2] and [3] of this array can be
selected. Elements [0] and [1] of the array are fixed.
Function:
View a DeviceNet-specific Warning word. One bit is assigned to every warning. Please refer to the DeviceNet
Operating Instructions (MG.33.DX.YY) for further information.
Bit:
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Select the reference source in Instance 21/71 and 20/70.
Enables reference via analog/digital inputs.
Enables reference via the fieldbus.
MG.33.M3.02 - VLT
Meaning:
Bus not active
Explicit connection timeout
I/O connection
Retry limit reached
Actual is not updated
CAN bus off
I/O send error
Initialization error
No bus supply
Bus off
Error passive
Error warning
Duplicate MAC ID Error
RX queue overrun
TX queue overrun
CAN overrun
®
is a registered Danfoss trademark
FC 300 Programming Guide