Danfoss FC 300 Programming Manual page 33

FC 300 Programming Guide
[9914] Paramdb Requests in
Queue
[1675] Analog input X30/11
[1676] Analog input X30/12
[1677] Analog output X30/8
mA
0-20 Display Line 1.1 Small
Option:
*
Speed [RPM]
[1617]
0-21 Display Line 1.2 Small
Option:
* Motor Current [A]
[1614]
0-22 Display Line 1.3 Small
Option:
* Power [kW]
[1610]
0-23 Display Line 2 Large
Option:
* Frequency [Hz]
[1613]
0-24 Display Line 3 Large
Option:
*
Counter [kWh]
[1502]
0-25 My Personal Menu
Array [50]
[0 - 9999]
2.3.5. LCP Custom Readout, Par. 0-3*
It is possible to customize the display elements for various purposes: *Custom Readout. Value proportional to speed (Linear, squared or cubed depending
Custom Readout Unit
on unit selected in par. 0-30
Custom Readout
The calculated value to be displayed is based on settings in par. 0-30,
Custom Readout Max Value
, par. 4-13/4-14,
Function:
Select a variable for display in line 1, middle position. The options are the same as listed for par. 0-2*.
Function:
Select a variable for display in line 1, middle position. The options are the same as listed for par. 0-2*.
Function:
Select a variable for display in line 1, right position. The options are the same as listed for par. 0-2*.
Function:
Select a variable for display in line 2. The options are the same as those listed for par. 0-2*.
Function:
Select a variable for display in line 2.
The options are the same as those listed for par. 0-20
Define up to 50 parameters to appear in the Q1 Personal Menu, accessible via the [Quick Menu] key on the LCP.
The parameters will be displayed in the Q1 Personal Menu in the order they are programmed into this array
parameter. Delete parameters by setting the value to '0000'.
For example, this can be used to provide quick, simple access to just one or up to 50 parameters which require
changing on a regular basis (e.g. for plant maintenance reasons) or by an OEM to enable simple commissioning
of their equipment.
) *Display Text. Text string stored in a parameter.
Custom Readout Unit
Motor Speed High Limit
and actual speed.
®
MG.33.M3.02 - VLT is a registered Danfoss trademark
2. How to Programme
Display Line 1.1 Small .
Custom Readout Min Value
, par. 0-31
2
, (linear only), par. 0-32,
33