Introduction; Approvals; Symbols - Danfoss FC 300 Programming Manual

FC 300 Programming Guide

1. Introduction

This Programming Guide can be used for all FC 300 frequency converters with software version 4.8x.
The software version number can be seen from parameter 15-43.

1.1.1. Approvals

1.1.2. Symbols

Symbols used in this guide.
NB!
Indicates something to be noted by the reader.
Indicates a general warning.
Indicates a high-voltage warning.
*
Indicates default setting
FC 300
Programming Guide
Software version: 4.8x
®
MG.33.M3.02 - VLT is a registered Danfoss trademark
1. Introduction
1
3