Parameters: Devicenet Can Fieldbus - Danfoss FC 300 Programming Manual

FC 300 Programming Guide
Read only
*
0 [0 - 115]
9-91 Changed Parameters (2)
This parameter displays a list of all the frequency converter parameters deviating from default setting.
Array [116]
No LCP access
Read only
*
0 [0 - 115]
9-92 Changed Parameters (3)
This parameter displays a list of all the frequency converter parameters deviating from default setting.
Array [116]
No LCP access
Read only
*
0 [0 - 115]
9-94 Changed Parameters (5)
This parameter displays a list of all the frequency converter parameters deviating from default setting.
Array [116]
No LCP access
Read only
*
0 [0 - 115]

2.13. Parameters: DeviceNet CAN Fieldbus

2.13.1. 10-** DeviceNet and CAN Fieldbus
Parameter group for DeviceNet CAN fieldbus parameters.
2.13.2. 10-0* Common Settings
Parameter group for configuring common settings for CAN fieldbus options.
10-00 CAN Protocol
Option:
[0] CANopen
*
DeviceNet
[1]
Function:
View the active CAN protocol.
®
MG.33.M3.02 - VLT is a registered Danfoss trademark
2. How to Programme
119
2