Danfoss FC 300 Programming Manual page 38

2. How to Programme
0-66 Access to Quick Menu w/o Password
Option:
*
Full access
[0]
[1] Read only
2
[2] No access
[3] Bus: Read only
[4] Bus: No access
[5] All: Read only
[6] All: No access
Access to Main Menu w/o Password
If par. 0-61
0-67 Bus Password Access
Range:
*
0 [0 - 9999]
38
Function:
Disables the password defined in par. 0-65
Prevents unauthorised editing of Quick Menu parameters.
Prevents unauthorised viewing and editing of Quick Menu parameters.
Read only functions for parameters on fieldbus and/ or FC standard bus.
No access to parameters is allowed via fieldbus and/ or FC standard bus.
read only function for parameters on LCP, fieldbus or FC standard bus.
No access from LCP, fieldbus or FC standard bus is allowed.
Full access
is set to [0] then this parameter will be ignored.
Function:
Writing to this parameter enables users to unlock the frequency converter from bus/ MCT10
®
MG.33.M3.02 - VLT is a registered Danfoss trademark
FC 300 Programming Guide
Quick Menu Password
.