Danfoss FC 300 Programming Manual page 162

2. How to Programme
16-72 Counter A
Range:
*
0 [-2147483648 -2147483647]
2
16-73 Counter B
Range:
*
0 [-2147483648 -2147483647]
16-74 Precise Stop Counter
Range:
*
0 [0 - 2147483647]
16-75 Analog In X30/11
Range:
*
0.000 [0.000 - 0.000]
16-76 Analog In X30/12
Range:
*
0.000 [0.000 - 0.000]
16-77 Analog Out X30/8 16-77 [mA]
Range:
*
0.000 [0.000 - 0.000]
2.17.7. 16-8* Fieldbus & FC Port
Parameters for reporting the BUS references and control words.
16-80 Fieldbus CTW 1
Range:
*
0 [0 - 65535]
16-82 Fieldbus REF 1
Range:
*
0 [-200 - 200]
16-84 Comm. Option STW
Range:
*
0 [0 - 65535]
16-85 FC Port CTW 1
Range:
*
0 [0 - 65535]
162
Function:
View the present value of Counter A. Counters are useful as comparator operands, see par. 13-10.
The value can be reset or changed either via digital inputs (parameter group 5-1*) or by using an SLC action
(par. 13-52).
Function:
View the present value of Counter B. Counters are useful as comparator operands (par. 13-10).
The value can be reset or changed either via digital inputs (parameter group 5-1*) or by using an SLC action
(par. 13-52).
Function:
Returns the actual counter value of precise counter (par. 1-84).
Function:
View the actual value at input X30/11 of MCB 101.
Function:
View the actual value at input X30/12 of MCB 101.
Function:
View the actual value at input X30/8 in mA.
Function:
View the two-byte Control word (CTW) received from the Bus-Master. Interpretation of the Control word depends
on the fieldbus option installed and the Control word profile selected in par. 8-10.
For more information please refer to the relevant fieldbus manual.
Function:
View the two-byte word sent with the control word form the Bus-Master to set the reference value.
For more information please refer to the relevant fieldbus manual.
Function:
View the extended fieldbus comm. option status word.
For more information please refer to the relevant fieldbus manual.
Function:
View the two-byte Control word (CTW) received from the Bus-Master. Interpretation of the control word depends
on the fieldbus option installed and the Control word profile selected in par. 8-10.
®
MG.33.M3.02 - VLT is a registered Danfoss trademark
FC 300 Programming Guide