3.10 QUICK-CHANGE PLATFORM MOUNTING
MVL Model Lifts are equipped with quick-change platform
mounts which allow quick removal and installation of currently
available quick-change platforms.
NOTE: MSP Models require the installation of the Quick-Change
mount kit to use Quick-Change Platforms.
(see illustration following)
Platform Removal
1. Remove the platform control console from the plat-
form and lay aside.
2. Remove both upper and lower mount attach pins
securing the platform support rails to the mast
mounting channels.
3. Swing and lift the platform out of the mounts and lay
aside.
Platform Installation
1. Set platform in upper and lower mounts.
2. Install attach pins in upper and lower mounts.
3. Attach platform control console to platform rail.
ENSURE ALL PINS AND FASTENERS ARE INSTALLED AND SECURE PRIOR TO
OPERATION.
3121230
SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
1. Upper Platform Mount
2. Upper Mount Attach Pins
– JLG Lift –
1
2
3
4
Quick-Change Platform Mounting
3. Lower Platform Mount
4. Lower Mount Pins
3-31