ABB ACH580 Series User Manual page 79

70
Group 51: External Comm Mode
Code
5101
5102
...
5126
5127
5128
5129
5130
5131
5132
5133
Group 52: FBA Data In
Code
5201
...
5210
Parameters
Name Resolution
FBA TYPE 1
FBA PAR 2 1
...
FBA PAR 26
REFRESH 1
FBA PAR 28 1
FBA PAR 29 1
FBA PAR 30 1
FBA PAR 31 1
FBA PAR 32 1
FBA PAR 33
Name Resolution
DATA IN 1 1
...
DATA IN 10
ACH580 E-Clipse bypass and packaged drive user manual
Group 51: External Comm Mode
Range
0 = NOT DEFINED
1 = Profibus
15 = LonWorks
37 = DeviceNet
502 = Modbus TCP
2222 Ethernet/IP
0 - 65535
0 = DONE
1 = REFRESH
0 - 0xFFFF
0 - 0xFFFF
0 - 0xFFFF
0 - 6
0 - 0xFFFF
0 - 0xFFFF
Group 52: FBA Data In
Range
0 = Not In Use
1 = Control Word (ABBDP)
2 = Ref 1 (ABBDP)
3 = Ref 2 (ABBDP)
4 = Status Word (ABBDP)
5 = Actual Value 1 (ABBDP)
6 = Actual Value 2 (ABBDP)
0101h -063FFh = Drive
parameters
8101h - E3FFh = Bypass
parameters + 8000h
Default Description
— Displays type of attached
fieldbus adapter module.
0 Fieldbus specific - consult FBA
User's Manual.
0 Validates any changed adapter
module configuration
parameters. After refreshing,
value reverts automatically to
DONE.
0 Parameter table version
0 Bypass type code
0 Mapping file version
0 Fieldbus adapter status
0 Module common software
version
0 Module application software
version
Default Description
0 Specifies information to be
read from the drive (into
the network). Only for
modules that support the
cyclic low scanner function
(such as FMBT-12).
For specifying values 1-6,
select ABB drive's profile
information, like status
word or actual values.
To specify drive
parameters, use the format
ggh.pph where gg
parameter group in
hexadecimal and pp
the parameter in
hexadecimal.
For instance, drive
parameter 30.14 is
encoded as 1E0Eh.
Bypass parameter is
specified as 8000h +
gg .pp . For instance,
h h
bypass parameter 0114 is
encoded as 810Eh.
is the
h
is
h