ABB ACH580 Series User Manual page 74

ACH580 E-Clipse bypass and packaged drive user manual
Code
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
Name Resolution
DISP WRNGS 1
DRIVE TEST 1
PASS CODE 1
PAR LOCK 1
PERMSV TXT 1
INTLK1 TXT 1
INTLK2 TXT 1
INTLK3 TXT 1
INTLK4 TXT 1
COMM CTRL 1
Group 16: System Control
Range Default
0 = DISABLE ENABLE
1 = ENABLE (1)
0 = DISABLE DISABLE
1 = ENABLE (0)
0 - 65535 123
0 = LOCKED OPEN
1 = OPEN (1)
0 = PERMISSIVE PERMISSIVE
1 = DAMPER (0)
END SWTCH
2 = VALVE
OPENING
3 = PRE-LUBE
CYCLE
0 = INTERLOCK 1 INTERLOCK 1
1 = VIBRATION (0)
SWITCH
2 = FIRESTAT
3 = FREEZESTAT
4 =
OVERPRESSUR
E
5 = VIBRATION
TRIP
6 = SMOKE
WARNING
7 = SAFETY
OPEN
8 = LOW
SUCTION
0 = INTERLOCK 2 INTERLOCK 2
... (0)
0 = INTERLOCK 3 INTERLOCK 3
... (0)
0 = INTERLOCK 4 INTERLOCK 4
... (0)
0 = DRIVE ONLY DRIVE ONLY
1 = SYSTEM (0)
65
Description
Enables warnings to be
displayed:
INP PHASE A LOSS,
INP PHASE B LOSS,
INP PHASE C LOSS,
MTR OVERLOAD,
BYPASS DISABLED,
DRIVE SETUP,
PCB TEMP
DRIVE LINK ERROR
DRIVE FAULTED
Enables drive test mode. Drive
contactor is opened.
Pass code entry to edit panel
lock parameter and view/edit
security lock parameters. The
security parameters are
1640 – 1644. Default: 123
When switched to "LOCKED"
prevents parameter changes
from panel. Does not affect to
Field Bus writes, expect
changing the lock value itself:
correct password must always
be set first, even in case of Field
Bus.
Alternative text choices for
warning 4006.
Alternative text choices for
warning 4021.
Alternative text choices for
warning 4022.
See parameter 1621 for range.
Alternative text choices for
warning 4023.
See parameter 1621 for range.
Alternative text choices for
warning 4024.
See parameter 1621 for range.
Selects comm control mode. In
drive only mode, control of drive
is made through drive points,
and control of bypass over
comms is not possible. In
system mode, control of system
(bypass or drive) is made
through bypass points.
Parameters