Options And Accessories Overview; Fieldbus Devices - Danfoss VLT AutomationDrive FC 302 Design Manual

Options and Accessories Ove...

6 Options and Accessories Overview

6.1 Fieldbus Devices

This section describes the fieldbus devices that are
®
available with the VLT AutomationDrive FC 302 series.
Using a fieldbus device reduces system cost, delivers faster
and more efficient communication, and provides an easier
user interface. For ordering numbers, refer to
chapter 13.2 Ordering Numbers for Options and Accessories.
6.1.1 VLT ®
PROFIBUS DP-V1 MCA 101
®
The VLT PROFIBUS DP-V1 MCA 101 provides:
•
Wide compatibility, a high level of availability,
support for all major PLC vendors, and compati-
bility with future versions.
•
Fast, efficient communication, transparent instal-
lation, advanced diagnosis, and parameterization
and auto-configuration of process data via a GSD
file.
•
Acyclic parameterization using PROFIBUS DP-V1,
PROFIdrive, or Danfoss FC profile state machines.
6.1.2 VLT ®
DeviceNet MCA 104
®
The VLT DeviceNet MCA 104 provides:
•
Support of the ODVA AC drive profile supported
via I/O instance 20/70 and 21/71 secures compati-
bility to existing systems.
•
Benefits from ODVA's strong conformance testing
policies that ensure products are interoperable.
6.1.3 VLT ®
CAN Open MCA 105
The MCA 105 option provides:
•
Standardized handling.
•
Interoperability.
•
Low cost.
This option is fully equipped with both high-priority access
to control the drive (PDO communication) and to access all
parameters through acyclic data (SDO communication).
For interoperability, the option uses the DSP 402 AC drive
profile.
MG38C202
Design Guide
6.1.4 VLT
The MCA 113 option is a special version of the PROFIBUS
options that emulates the VLT
®
VLT AutomationDrive FC 302.
®
The VLT
AutomationDrive FC 302, or an existing system can be
expanded without costly change of the PLC program. For
upgrade to a different fieldbus, the installed converter can
be removed and replaced with a new option. The MCA 113
option secures the investment without losing flexibility.
6.1.5 VLT
The MCA 114 option is a special version of the PROFIBUS
options that emulates the VLT
®
VLT AutomationDrive FC 302. This option supports DP-V1.
®
The VLT
AutomationDrive FC 302, or an existing system can be
expanded without costly change of the PLC program. For
upgrade to a different fieldbus, the installed converter can
be removed and replaced with a new option. The MCA 114
option secures the investment without losing flexibility.
6.1.6 VLT
®
The VLT
performance with the highest degree of openness. The
option is designed so that many of the features from the
®
VLT PROFIBUS MCA 101 can be reused, minimizing user
effort to migrate PROFINET and securing the investment in
a PLC program.
•
•
•
•
•
•
Danfoss A/S © 01/2018 All rights reserved.
®
PROFIBUS Converter MCA 113
®
3000 commands in the
3000 can be replaced by the VLT
®
PROFIBUS Converter MCA 114
®
5000 commands in the
5000 can be replaced by the VLT
®
PROFINET MCA 120
PROFINET MCA 120 combines the highest
®
Same PPO types as the VLT
MCA 101 for easy migration to PROFINET.
Built-in web server for remote diagnosis and
reading out of basic drive parameters.
Supports MRP.
Supports DP-V1. Diagnostic allows easy, fast, and
standardized handling of warning and fault
information into the PLC, improving bandwidth in
the system.
Supports PROFIsafe when combined with VLT
Safety Option MCB 152.
Implementation in accordance with Conformance
Class B.
®
6
®
PROFIBUS DP V1
®
31
6