Danfoss VLT AutomationDrive FC 302 Design Manual page 195

How to Order a Drive
13.1.1 Ordering Type Code for Enclosures D1h–D8h
Description
Product group
Model
Mains voltage
Enclosure
RFI filter
Brake
Display
PCB coating
Mains option
Adaptation
Adaptation
Software release
Software language
Table 13.3 Ordering Type Code for Enclosures D1h–D8h
1) Available for all D-frames.
MG38C202
Design Guide
Pos Possible choice
1-6 FC-302
7–10 N55: 55 kW (60 hp)
N75: 75 kW (75 hp)
N90: 90 kW (100–125 hp)
N110: 110 kW (125–150 hp)
N132: 132 kW (150–200 hp)
N160: 160 kW (200–250 hp)
N200: 200 kW (250–300 hp)
N250: 250 kW (300–350 hp)
N315: 315 kW (350–450 hp)
11-12 T5: 380–500 V AC
T7: 525–690 V AC
13-15 E20: IP20 (chassis - for installation in an external enclosure)
E2S: IP20/chassis - D3h Frame
E21: IP21 (NEMA 1)
E2D: IP21/Type-1 D1h Frame
E54: IP54 (NEMA 12)
E5D: IP54/Type-12 D1h Frame
E2M: IP21 (NEMA 1) with mains shield
E5M: IP54 (NEMA 12) with mains shield
C20: IP20 (chassis) + stainless steel back channel
C2S: IP20/chassis with stainless steel back channel - D3h Frame
H21: IP21 (NEMA 1) + heater
H54: IP54 (NEMA 12) + heater
16-17 H2: RFI filter, class A2 (standard)
H4: RFI filter class A1
18 X: No brake IGBT
B: Brake IGBT mounted
R: Regeneration terminals
S: Brake + regeneration (IP20 only)
19 G: Graphical Local Control Panel LCP
N: Numerical Local Control Panel (LCP)
X: No Local Control Panel
20 C: Coated PCB
R: Coated PCB + ruggedized
21 X: No mains option
3: Mains disconnect and fuse
4: Mains contactor + fuses
7: Fuse
A: Fuse and load sharing (IP20 only)
D: Load share terminals (IP20 only)
E: Mains disconnect + contactor + fuses
J: Circuit breaker + fuses
22 X: Standard cable entries
23 X: No adaptation
Q: Heat sink access panel
24-27 Actual software
28 X: Standard language pack
Danfoss A/S © 01/2018 All rights reserved.
1)
13 13
193