Danfoss VLT AutomationDrive FC 302 Design Manual page 199

How to Order a Drive
13.2.4 Ordering Numbers for D Option: 24 V Back-up Supply
Description
®
VLT 24 V DC Supply MCB 107
Table 13.9 Ordering Numbers for D Option
13.2.5 Ordering Numbers for Software Options
Description
®
VLT MCT 10 Set-up Software - 1 user.
®
VLT MCT 10 Set-up Software - 5 users.
®
VLT MCT 10 Set-up Software - 10 users.
®
VLT MCT 10 Set-up Software - 25 users.
®
VLT MCT 10 Set-up Software - 50 users.
®
VLT MCT 10 Set-up Software - 100 users.
®
VLT MCT 10 Set-up Software - unlimited users.
Table 13.10 Ordering Numbers for Software Options
13.2.6 Ordering Numbers for D1h–D8h Kits
Type
Miscellaneous hardware
NEMA 3R outdoor weather
shield, D1h
NEMA 3R outdoor weather
shield, D2h
NEMA 3R for in-back/out-back
cooling kit within a welded
enclosure, D3h
NEMA 3R for in-back/out-back
cooling kit within a Rittal
enclosure, D3h
NEMA 3R for in-back/out-back
cooling kit within a welded
enclosure, D4h
NEMA 3R for in-back/out-back
cooling kit within a Rittal
enclosure, D3h
Adaptor plate, D1h/D3h
Adaptor plate, D2h/D4h
Back-channel duct kit, D3h
Back-channel duct kit, D3h
Back-channel duct kit, D4h
MG38C202
Design Guide
Description
Shield designed to protect drive openings from direct sun, snow, and
falling debris. Drives using this shield must be ordered from the
factory as NEMA 3R ready, which is found in the type code as E5S
enclosure option.
Shield designed to protect drive openings from direct sun, snow, and
falling debris. Drives using this shield must be ordered from the
factory as NEMA 3R ready, which is found in the type code as E5S
enclosure option.
Provides an ingress protection rating of NEMA 3R or NEMA 4. These
enclosures are intended for outdoor use to provide protection against
inclement weather.
Provides an ingress protection rating of NEMA 3R or NEMA 4. These
enclosures are intended for outdoor use to provide protection against
inclement weather.
Provides an ingress protection rating of NEMA 3R or NEMA 4. These
enclosures are intended for outdoor use to provide protection against
inclement weather.
Provides an ingress protection rating of NEMA 3R or NEMA 4. These
enclosures are intended for outdoor use to provide protection against
inclement weather.
Plate used to replace an enclosure D1/D3 with the D1h/D3h using the
same mounting configuration.
Plate used to replace an enclosure D2/D4 with the D2h/D4h using the
same mounting configuration.
Duct kit that converts enclosure to either in-bottom/out-top venting
or top only venting. Enclosure size: 1800 mm (70.9 in).
Duct kit that converts enclosure to either in-bottom/out-top venting
or top only venting. Enclosure size: 2000 mm (78.7 in).
Duct kit that converts enclosure to either in-bottom/out-top venting
or top only venting. Enclosure size: 1800 mm (70.9 in).
Danfoss A/S © 01/2018 All rights reserved.
Ordering number
Uncoated Coated
130B1108 130B1208
Ordering number
130B1000
130B1001
130B1002
130B1003
130B1004
130B1005
130B1006
Ordering number
176F6302
176F6303
176F3521
176F3633
176F3526
176F3634
176F3409
176F3410
176F3627
176F3629
176F3628
13 13
197