Fluke 9118A User Manual page 62

9118A
Users Manual
Response: 700.00
Example:
SOUR:SENS:DATA? FULL
Response: 700.00,600.00
SOURce:SENS:DATA? [sensor function]
Gets sensor temperature in °C or °F.
Parameters: function = CJC – CJC Senor temperature
Example:
SOUR:SENS:DATA? CJC
Response: 36.12
SOURce:SPO [n]
Sets the control setpoint.
Parameters: n =
This command has password protection. Use the SYST:PASS:CEN command first before you use this command to
set this value.
Example:
SOUR:SPO 400.00
SOURce:SPO?
Gets the control setpoint.
Example:
SOUR:SPO?
Response: 300.00
SYSTem:BEEP:KEYB [n]
Sets the state of the keyboard beep function.
52
Main temperature is 700.00 degrees.
Main temperature is 700.00 degrees and zone temperature is 600.00 degrees.
MTC – Monitor TC sensor
The CJC sensor is at 36.12 °C.
300.00 to 1200.00 degrees Celsius (Default = 300.00).
Sets the setpoint temperature to 400.00 degrees.
Setpoint temperature is set to 300.00 degrees.
Note