Table of Contents
Advertisement
How to Move the Product
Warning
To prevent personal injury, use proper
techniques to lift the Product.
When you lift the Product, bend your knees and lift with
your legs. Before you move the Product, let it cool to
ambient temperatures and remove the control and cutout
thermocouples and all objects in the furnace well. To
safely move the Product, two people are necessary. Put
one person in the front and one person at the rear of the
Product. Carefully put your hands under the Product and
lift in unison.
Caution
To prevent damage to the Product, remove the
isothermal block and rear plug prior to
transporting the furnace. The ceramic furnace
tube is fragile and can be damaged by the
block.
Product Components
As shown in Figure 1 the two primary components of the
Product are the furnace and the controller. Figures 2 and 3
show the thermocouple calibration furnace with the
isothermal block. The isothermal block shown in Figure 2
is made of aluminum-oxide and provides a constant and
accurate temperature environment for the sensor under
test. Four 6.7 mm diameter wells are provided.
Calibration Furnace
Product Components
7
Advertisement
Table of Contents
