Fluke 9118A User Manual page 25

2. Insert the long and short protection tubes into flange
nuts and screw them into position.
•
Long tube in the right side.
•
Short tube in the left side. See Figure 7.
Short Tube
Long Tube
Figure 7. Short Tube and Long Tube Insertion
3. This step is only for the optional isothermal block
(9118A-ITB). Insert the rear plug carefully into position.
See Figure 8.
Rear Plug
gxs125.eps
Calibration Furnace
Product Components
Figure 8. Rear Plug Insertion
gxs126.eps
15