Replacing Toothed Belt - Porsche 928 Workshop Manual

928 Engine, Cylinder Head, Valves
15
REPLACING TOOTHED BELT (32 VALVE ENGINE)
1. Remove air cleaner intake hoses.
2. Unscrew air guide on radiator at top and
bottom,
and remove.
3. Loosen and take off drive belts for
alternator, power pump, air pump and
air conditioner compressor.
4. Disconnect cables for throttle, cruise
control and automatic transmission.
Remove retainers and clamp on console
and place
cables
outside.
5. Loosen and remove fan console on
engine.
6. Pull off left and right ignition leads on
distributor cap. Unscrew and place
distributor cap aside.
7. Take off both distributor rotors.
Disconnect plugs for A/C compressor
and toothed
belt
tightness indicator.
8. Unscrew toothed belt cover upper
section on both sides and take off
righthand upper section.
9. Unscrew power pump on console and
let it hang down on its hoses.
Printed
in
Germany
- X, 1984
Replacing Toothed Belt 15 - 105