Porsche 928 Workshop Manual page 544

28
Ignition System
928
Assembly notes
Dismantling
Pull off pulley along with flange washer, e.g.
with two-way bearing puller CORA
No. 47-100
Supplier:
Messrs.
Albert Schrem
Postfach 1504
D-7928 Giengen 1
Assembly
Set up distributor shafts In basic position.
Fit pulley and toothed belt.
After assembly, the distributor rotors must
point towards the housing notches. Set en-
gine to cylinder no. 1 firing TDC and install
distributor in this position.
28-48b Dismantling and assembling distributor a
Prinled In Germany -XXIX. 1992