Porsche 928 Workshop Manual page 678

30
Clutch, Controls
928
These jobs can only be performed after removal of
REMOVING AND INSTALLING CLUTCH
the clutch housing.
HOUSING
Removing
1. Remove front exhaust lines.
2. With clutch removed unscrew mounting bolts
for central tube to clutch housing and clutch
housing to engine.
3. Remove both mounting bolts of transmission
mounts on rear axle cross member.
Tl
*
7
4. Apply tire iron con transmission and rear axle
cross member. Push back transmission and
central tube far enough so that the clutch
housing can be removed.
30.22
Replacing Ball Stud
Removing and Installing Clutch Housing
Printed in Germany