Porsche 928 Workshop Manual page 116

928
Engine, Crankcase
10
23.Remove both transmission mount
bolts.
25.Disconnect and remove oil temp-
erature sensor. Disconnect
fuel return line while countering
nut with second open-ended wrench.
A.-.-
LJ .
*--s%?J
24.Disconnect hose from heating
regulator and pipe stub on en-
gine and remove. Pull under-
pressure line for automatic
transmission from underpressure
distributor.
26.Unscrew bolts for clutch housing-
engine housing top and bottom
(e.g. jointed socket wrench) and
push transmission toward rear
(approx. 5 - 6 mm).
27.Disconnect air conditioner com-
pressor plug connector, remove com-
pressor from bracket and hang on
one side with hoses in place.
Printed in Germany - XII, 1986
Engine, Removing and Installing 10 - 15