Porsche 928 Workshop Manual page 918

928 Manual Transmission/Controls, Case
34
10. Place reverse gear and needle cages in
case as shown in the picture.
11. Screw centering pins, Special Tools 9321,
in case for installation of drive pinion and
install shims S3.
12. Mount Special Tool 9144 on drive
pinion bearing cap and move in drive
pinion carefully (with 4th gear engaged).
Check that reverse gear is positioned
correctly.
A = Soecial Tool 9321
Note
When installing the drive pinion make sure
that pins of synchromesh ring (5th gear)
engage in openings of guide sleeve.
I
: ~~?.~~~
:...
".&'
;fjj'
ty&_.- _,_ _ A_r!
$&
T
' 1
f
['irp-: -~- -<
CL? * 9:
Printed in Germany _ x, ,994
Disassembling and Assembling Transmission
34 - 211