Porsche 928 Workshop Manual page 648

928
Clutch, Controls
30
Note When: Special
NO. Description Qty. Removing Installing
Instructions
1 Return spring 1 Position correctly
The return
spring (from
1982 models
on) can also be
used in older
cars
2 Retainer 1
Replace if
necessary
3
Washer
1
4 Shaft 1 Coat with multi-
purpose grease
5
Retainer 1
Replace if necessary
6
Washer 1
7 Shaft 1 Coat with multi-
purpose grease
8
Retainer 1 Replace if
"MXSSXy
9 Washer
1
10
Guide rod/ 1
Insert assembly
clutch power spring
wire (see page
assy. 30.2.~)
11 Retainer 1 Replace if
necessary
12 Bearing shaft 1 Install with
multi-purpose grease.
Can only be pushed
in fully when
surfaces on bearing
shaft and console
are aligned.
13 Brake pedal 1 Spacers (pedal
adjurtmentl are
available
Printed in Germany VII, 1983
Removing and Installing Clutch Pedal 30.2~