Alternator, Removing And Installing - Porsche 928 Workshop Manual

929
Starter, Power Supply, Tempostat
27
Alternator, removing and installing
as from Model 85
Removing
1. Disconnect the battery ground connection
behind the tool panel.
2. Mt the vehicle and remove the sump guard.
3. Pull off the ventilation hose for the alter-
nator.
Installing
Check and adjust the poly-rib drive tension for
the alternator, see Page 13 - 16 b.
Tightening torque of the fastening screws
M 10 = 45 Nm.
a
4. Undo both nuts and the alternator adjust-
ment screw. Loosen the bracket on the con-
sole, swivel the alternator inwards and
remove the poly-rib drive belt.
5. Disconnect the electrical connectors from
the oil pressure sensor.
6. Undo the alternator's fastening screw and
pull out forwards. Remove the alternator
downwards.
7. Remove the air box and detach electrical
connections.
a
Alternator, removing and installing
27 - 25
Printed In Germany - XX, tsaa